The CNC Router Bit “One and Done” Starter Set

For the brand new CNC router owner who’s trying to figure this whole CNC thing out

Welcome to the most complete CNC Router Bit Starter Set for beginners

One Set, Shopping’s Done!

If you’re new to CNC routers, then you are probably a little confused when it comes to finding a good starter set of CNC router bits.

Below, you will find exactly the bits you need to start carving almost any project you design.

Welcome To Your New Complete Set Of Rock-Solid Carbide CNC Router Bits!

What You Get…

1/4" Down-cut Endmill

1/8" Down-cut Endmill

1/16" Down-cut Endmill

1/4" Ballnose Endmill

1/8" Ballnose Endmill

90-Degree V-bit

60-Degree V-bit

30-Degree V-bit

What Makes Your Set Complete?

1/4″ Down Cut Endmill

The workhorse of your entire set!.. And the mainstay of every CNC’er. This puppy is designed to remove material fast while leaving super-clean cut lines. From small to big jobs, you’ll use this bit a lot!

1/8″ Down Cut Endmill

The little brother of the 1/4″ endmill. It does the same thing, except it gets into those spaces his big brother can’t to finish the job.

1/16″ Down Cut Endmill

This bit is like the refined lady of the down-cut trio. When your projects need that delicate touch, you’re reaching for this one. This little bit lets you do the fine work in those super-tight spaces to bring out the true beauty of your projects.

1/4″ Ball Nose Endmill

A sign is just a sign until you add the accented touch to it. This bit creates those accents and soft curves to give your projects the character that makes your project pop!

1/8″ Ball Nose Endmill

You know those cool 3D carvings you’ve seen people make? This is the bit that does it! Watching this bit dance across the contours of a 3D project is like watching a campfire. It’s mezmerizing.

90° V-Bit Blade

Like the 1/4″ endmill, this is the go-to bit to carve words and swirls in your projects. I call this the git-‘er-done bit because it carves almost any shape you can come up with. And the blade design leaves your cuts baby-bottom smooth.

60° V-Bit Blade

Have you seen those very cool inlays people make on their CNC routers? This guy is the one to do it with. It also v-carves those finer designs the 90° can’t do. This is the most versatile v-bit in your CNC router bit arsenal!

30° V-Bit Blade

Then there’s your engraving bit. When you want to capture phenomenally fine details, like carving a handwritten letter you have as a keepsake this is the bit you want!

Each bit is specifically selected to get you on the right track the first time.

But we’re not done yet because there are more things you need.

And they are included in your complete starter set!

You’re also getting…

The Necessary Surfacing Bit

Why is the surfacing bit important?

The surface your project is clamped to (the spoilboard) must be level with the motion of your router. If not, your carve WILL be uneven. And an uneven carve, even the in slightest, shows up dramatically!

The surfacing bit levels the spoilboard so this doesn’t happen. No spoilboard is perfectly flat until we surface it.

The good thing is, now you know, and you’ll have your surfacing bit on hand.

2 Collet Adapters

You get 2 collet adapters for your smaller bits to speed up your bit change.

Each precision-ground collet adaptor is made of case-hardened 4140 carbon steel and fits every 1/4″ router, so you can use 1/8″ diameter router bits

1/8″ Up-Cut ‘Drilling’ Endmill

This carbide endmill isn’t so standard.

With the double bevel at the tip, this endmill can drill holes!

Aside from the side-cutting, knife-edge flutes, the fast spiral is designed to eject the wood chips at lightning speed while plunging, making it optimal for drilling.

And, of course, it is a fast side-cutter too.

When you order now, you get this bonus…

The All-Important Feeds & Speed Tables In PDF

Setting up feeds and speeds correctly is vital to get the longest life and best cuts from your bits.

This is where almost all CNC router bit suppliers miss the mark. They don’t give you the feeds & speeds with the bits. You have to go searching for them.

Not here. You get your feeds & speeds table the second you order your set!

This feeds & speeds PDF gives you all the data needed to make sure your new CNC router bits are set up exactly as they need to be.

But that’s just the start. This 30-page PDF book covers feeds & speeds for ALL the bits you can possibly get for your CNC router.

Perk Alert → It has links listed right next to every bit so you never have to search for a bit you want. Just click the link and you’ll go right to the source. Now that makes it easy!

A Completely Populated Router Bit Database For Vectric

Setting up your bits in your design software is time-consuming. It’s also easy to make mistakes this way.

Unfortunately, most design software has only the basic bits set up.

If you have Vectric, this won’t be an issue, because you’re getting a fully populated router bit database with all the settings pre-installed.

A 15-minute video shows you exactly how to install the database. No manual entry!

Even better… When it’s time to replace a bit, or get other styles, the links are listed right in the database. No browsing the web, and faced with a ton of selections. One click and you have your new bit ordered!

Being a beginner, I found it frustrating wanting to do some CNC’ing and not knowing which bit to use. Looking around online, this kit by far has to be the best one out there. Not only being American-made carbide bits, but you get the feed and speed rates. That alone is worth it.

Sergio P.

No More Searching For A Set.

Everything you need is right here!

Your 100% Guarantee

These bits are 100% solid Tungsten-Carbide, and made to ISO tool-maker standards. Carbide is the same superior tool steel used by journeyman machinists to do their metalwork.

Your CNC router bits will exceed your performance expectations, for finish and durability, or you will receive a full refund.

…because your CNC projects absolutely MUST look amazing.

Get Your CNC Router bit Starter Set Now

End your search for a good starter set and start carving!

I was working on a project for my daughter and I forgot to set the Z. My CNC machine when to town, made some really small cuts and then headed right “through” the 1/4-20 bolt on my clamp. That 90-degree VBit I bought from you did a beautiful job of cutting through the top 1/8 inch off the bolt before passing on.

Thankfully no damage to the machine. As for the bit I bought from you … not a scratch, even under a magnifying glass! Made a believer out of me!

Tom K.

What Can You Create With Your New Bits?

Beautiful Inlays

Those Big Projects

V-Carved Signs

Elegant 3D Carves

Extreme Detail

Stacked Text

Your Favorite Artwork

Unique Designs

Express Your Pride

Finely Detailed Carves

Awards

Hardware For Your CNC Router

Make your own clamps on your CNC router, clamps for CNC routers

Accenting Your Projects

Even Glass & Acrylic Engraving

The variety of bits and extras thrown in by Garrett in this package are a great. Looking close at the sharpening, they look very professionally made and clearly marked. His videos explaining the use of these bits are a must for persons new to the CNC routing world.

Andrea H.

But we’re not done yet…

Here’s something you won’t get from any other router bit company…

A Special Beginner’s Bonus

An Organized List Of Every CNC Router Video On The IDC Woodcraft Channel

Have you ever wished someone would make an organized list of videos so you can just go in order? Now you do.

When you order your router bits, you’ll get a list of every single video on the IDC channel. AND THEY’RE ORGANIZED!

Organized by designing, CNC routers, router bits, and all the easy step-by-step projects I’ve laid out for you.

Just open the list and start right at the top. It’ll save you tons of searching.

This is about as good as it gets.

Then you get this little perk… Design files to get you started!

Where will you put your new bit collection?

…In your new router bit holder, of course.

When you order your CNC router bits, you will get the G-code file and instructions for this router bit holder.

And you get to make it!

You’re also getting a video tutorial on the entire setup and run.

It’s made from a standard piece of 2 x 6 so there’s no prep work. Just get a 10″ piece of 2 x 6, slap it on the router, and press ‘GO’!

This will be the first CNC project you get to run with your new router bits. And what better than to make a place to organize them.

Easy To Make Christmas Decoration

It’s all in the simplicity that makes the difference.

This design is done. All you have to do is run the toolpaths. That’s it.

The Most Popular CNC Project

The ‘WELCOME’ sign is the #1 project of all time!

So why not make this your first full-blown project on your CNC router!

This is an awesome learning project that will give you excellent practice on your design software.

The end product is a decoration you can use, or even sell.

The Warrior Woman Project

Want to help kids with cancer? 5% of your purchase is going to St. Jude hospital… The hospital that never bills their patients because people like you and me donate to them.

This project was made for my niece, Isabelle, who suffered from brain cancer when she was 6.

She was a rare survivor of that cancer, and it was St. Jude that saved her.

You will get the G-code file for this, as well as all other formats. Make it and give it to that person who needs the warrior spirit.

Did you know a CNC router doesn’t just do wood?

Willow Tree Glass Engraving

Did you think a CNC router is only good for wood projects? Think again!

How about engraving on glass and acrylic? Yes, your CNC router will do this. In fact, it’s a lot less messy than wood.

And get some LED lighting on, wow, it totally pops.

You’ll get this detailed vector of a willow tree with your set, as well.

Tree Of Life Glass Engraving

Yes. Another awesome glass and/or acrylic engraving project. The picture does not do justice to the amazing detail this image has.

You’ll see videos of this and all the other projects listed here.

And my favorite project to give you…

Make Your Own Clamps!

Make your own clamps on your CNC router, clamps for CNC routers

We need clamps to hold our projects. A set of 4 will cost you between $50 to $100 if you buy them.

You have a CNC router, you can make your own! And now you’ll have the files to do it.

This project file will give you 18 or 24 clamps, depending on the file you use.

These clamps are completely versatile. They can be stacked, so they will work with any thickness project.

It’s the first project you’ll totally love doing because you will use them constantly to hold your projects while carving.

The Best part is, you’re getting the g-code files. What does that mean? It means you don’t have to do any design work. Just follow the set up instructions, load the file into your router and press ‘GO’!

Here’s another bonus for you…

Words That Sell

WORDS… People buy them all the time!

And guess who makes the majority of them? CNC router owners do.

Look around your own home. It’s a near guarantee you have a word hanging somewhere that was made on a CNC router.

Anything from ‘home’ and ‘love’, to a slogan, to a name.

Remember the welcome sign file you’re getting? Guess what? ‘WELCOME’ is the #1 seller of all time!

I cannot express this enough…WORDS SELL!

And you’re about to get the list of the top 50 words people buy.

You might as well hit the ground running with a solid potential for income with your new CNC router.

All files download immediately so you can start working with them right now

“I decided to compare your end mills to the big brand end mills. I made up a little jig to cut box joints and needed a 1/4” end mill to cut some drawer sides.…I cut some with your mills, cut some with the Amana bits, cut some with some cheap Chinese end mills, and some with the Whiteside bits. Your mills cut the best.”

Tom K.

Extra Bonus

Order your set now and get a 2nd 1/8″ down cutting bit FREE

$23 value

Total value $458

$279

Save $30

YOURS FOR $249

Order Your Complete CNC Router Bit Set Today!

FREE shipping within the USA

I’m Garrett Fromme

I’m not just a home-based CNC’er, I’m a father & a grandfather. In short, a person just like you.

Choosing the right CNC router is challenging enough. We shouldn’t have to spend endless hours trying to figure out what bits we need.

It seems big business has forgotten that we are new, and need clear guidance when we buy a CNC machine.

Since that isn’t the case, I made it my business to fill that gap, and make sure you have everything you need in one shot.

Ultimate CNC Roter Bit Starter Set For Beginners 1/4 Shank by IDC Woodcraft The Only Truly Complete CNC Router Bit Starter Set w/ FREE Projects  (1/4")  (Wood) $249.00 Out Of Stock

Billing details

Your order

Product
Quantity
Total
Cart Subtotal $0.00
Tax $0.00
Order Total $0.00 USD
  • Pay with your credit card

Your personal data will be used to process your order, support your experience throughout this website, and for other purposes described in our privacy policy.

Your Cart

No products in the cart.
Free shipping on all orders over $75
Hit Enter to search or Esc key to close