The micro-detail 1/32″ down-cutting endmill bit is the CNC’ers magic to refined CNC router projects.
Detail doesn’t get much better than this.
There are 2 reasons you want this bit…
- You have decided your projects are going to better than everyone else’s
- You just want to push your limits of creativity.
A third reason is if you have a small unit with a 1/8″ collet capability. If so, this is a must to make your creations.
This bit is made like all the others on this site…built to last. That’s why these are made above industry standards and 100% tungsten carbide.
Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.
You’ll want to include a collet with this bit if you have a 1/4″ collet in your CNC router. You can order that by clicking here.
Order your ultra-finishing workhorse 1/32″ down-cut bit today. (a.k.a. down bit, down cut bit, downcut bit)
Made in the USA
- American-made, American sharp!
- Cut Diameter: 1/32″
- Shank: 1/8″
- Length: 1.51″
- Flutes: 2
- Flute length: 0.1875″
- Material: 100% carbide
- Feed: 15-25 inches per minute
- Plunge: 5 ipm
- Depth per pass: 0.016″
- Speed (rpm): 13000-16000
For Vectric users, get the latest CNC router bit tool database by clicking here
For CNC’s with routers, refer to this PDF download feeds & speeds table