The Big Stiffy series 90-degree v-bit CNC router bit with 1/4 shank is larger, and cuts deeper, than the typical 90 deg v bit. The extra body size lets you maximize your carve time while also leaving a clean cut.
With a 1/4″ shank, it is the go-to 90 deg carving bit for home-based CNC’ers when it comes to larger projects when you are large v carves and chamfers on your CNC router woodworking projects. The ‘super-shear’ blade design is designed to leave exceptionally clean cuts at higher feed rates. This is the v bit to use when your v-carved letters are wider than 1/4″ wide.
To see how effective your Big Stiffy 90-degree v-bit is, watch this YouTube video of a very large CNC router project completely carved in 11 minutes using the same size 120-degree V bit. The 60 deg grooving bit is designed to give you the exact same performance.
Why is it called the Big Stiffy? Overall, the bit body has more mass and has a slightly shorter shank. This little design modification keeps your bit stiffer during cuts, which gives you a 50% improvement in your surface finish. In other words, the potential for chatter is virtually eliminated.
Specs
- Shank: 1/4″ (6.35mm)
- Cut diameter: 0.75″ (25mm)
- Cut angle: 90 degrees
- Length: 2.0″ (52mm)
- Flutes: 2
- Flute length: 0.5″
- Material: 100% tungsten-carbide tipped
Settings
- Feed: 80 inches per minute (16mm/sec)
- Speed (rpm): 10000-14000
- Max pass depth: 0.5″ / 6mm
- Stepover: 20%
- For CNC routers, see the speeds & feeds table
For Vectric users, get the latest CNC router bit tool database by clicking here
For CNC’s with routers, refer to this PDF download feeds & speeds table
BV-90
| Weight | 2.5 oz |
|---|
0 Reviews
There are no reviews yet.