The Blade series v-bits are excellent for inlay work. This 60-degree v-bit (1/4 shank) for CNC routers is designed to leave an ultra-smooth cut so your CNC woodworking projects look awesome right off the machine.
V carving bits are not all the same. The Blade is designed with a knife edge all the way to the point! Not only can you carve to 0.005″ detail, but this CNC router bit actually cuts the wood, leaving a mind-blowing smooth cut that blows standard v bits out of the water. This is a true 60 deg v-bit!
Most 60 v grooving bits have a flat edge on them. They scrape the wood away which leaves a rough finish. And unless you want to sand your v-carves, you just might want to invest in this puppy first.
This and all bits on this site are made of 100% solid tungsten-carbide. That’s the material the professionals use because it lasts 50x longer than standard bits.
Even beginner CNC’ers never go back once they use the Blade v-bits!
Made in the USA
- Shank: 1/4″
- Length: 2.0″
- Flutes: 2
- Flute length: 0.375″
- Material: 100% tungsten-carbide
- Feed: 25-40 inches per minute
- Speed (rpm): 13000-16000
- For CNCs with routers, use full speed
For Vectric users, get the latest CNC router bit tool database by clicking here
For CNC’s with routers, refer to this PDF download feeds & speeds table