1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
HOG CNC roughing router bit by idc woodcraft
The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank
1/4" roughing bit hog and beast for cnc router bit projects by idc woodcraft
1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
HOG CNC roughing router bit by idc woodcraft
The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank
1/4" roughing bit hog and beast for cnc router bit projects by idc woodcraft

The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank

The 1/4" roughing endmill bit (hogging bit) is the bit when you need to remove massive amounts of material at one time from your CNC router project before you do your finish cuts.

  • Carving guitar bodies
  • Pocketing out deep box projects
  • Full 3D carvings
  • French/Victorian table legs

$45.43 USD

Availability: In Stock

Quantity:

Enhance Your Carve

1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects

The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank

$45.43 USD

Add this item

+

idc woodcraft beast 1/4" roughing cnc router bit

The "BEAST" 1/4 Hyper-Speed Roughing CNC Router Bit, 1/4 Shank

$45.43 USD

Add this item

+

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

$28.56 USD

Add this item

CHECK OUT THE HOG IN ACTION

Watch the HOG rip through wood at fantastic feed rates. The extended reach flutes allow you to carve deep pockets in your projects in no time flat!

Large projects, pockets and any hardwood you can think of are no match for the HOG!

Key Details

Feeds And Speeds

Reviews

If you're looking for speed to rough out your CNC router projects, the long 1/4 roughing endmill CNC router bit is the one you want!!. We call it the 'HOG' here at IDC Woodcraft because it literally is a hog when it comes to removing material mind-blowingly fast from your CNC woodworking project.

With a whopping 3/4" depth of cut per pass,  80ipm plunge rate (yes, I said plunge rate), 80ipm feed rate, and 80% step-over, this bit kicks serious ass when it comes to getting material removed, so you can follow up with your finishing bit to finish your job off.

But it's not just a time thing. Making the roughing endmill CNC router bit your workhorse for major material removal on your CNC woodworking projects, you save a ton of wear and tear from your regular up-cut, down-cut, or compression router bits. You'll only use them to do the finishing work.

That alone extends the life of your bits significantly, saving you money for replacements. At $40-ish bucks a pop, the long 1/4 roughing endmill will 100% save you some cash. Especially when it comes to hardwood.

What is the long 1/4 roughing endmill bit good for?

  • Guitar making
  • Keepsake box making
  • Cutting boards
  • Bulky 3D carvings
  • Table legs, like Victorian table legs or French table legs
  • Other thick woodworking projects when you need to remove a lot of wood from hardwood

Plainly put, the up-cutting long 1/4 roughing endmill bit is the CNC bit to use when you need to remove massive amounts of material!

It's not designed to make a pretty cut. It is designed for speed!

Do one better. Get the Long Router Bit Combo Set. It comes complete with a long 1/4 router bit (down-cut) AND a long 1/8 CNC router bit (down-cut)? Click here to check it out!

 

HE-14

Item SKU: HOG

Specs

  • Cut diameter: 1/4"
  • Shank: 1/4"
  • Length: 2.75"
  • Flutes: 3
  • Flute length: 1.5"
  • Material: 100% carbide

Settings

  • Feed rate: 80 inches per minute
  • Plunge rate: 80 inches per minute
  • Speed(rpm): 19,000
  • Depth per pass: up to 0.750"
  • Stepover: 80%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank

Customer Reviews

Based on 100 reviews
94%
(94)
2%
(2)
3%
(3)
0%
(0)
1%
(1)
D
Douglas White
Where have you been all my life?

The HOG! This piggy went to market and tore it up! It’s the Mike Tyson of roughing end mills! Keep ‘em coming IDC! One of the best product lines available!

J
Jamal alabbood
Hog 1/4"

I love this bit , it is the best i used on my cnc projects

J
Joseph Bravata II
Da Hog is Da BEAST

Outstanding bit. Cuts great and super fast!,

m
mike sherman

I think all the settings are way to high. If that's the case would that lead to the bit wearing out sooner?

D
David Price

I have not used The Hog yet.