The 1/8 down cut endmill bit (a.k.a. down bit, down cut bit, downcut bit) is the 2nd workhorse of CNC router bits when it comes to detail. It follows after the 1/4″ to do what the 1/4″ can’t reach.
There are 2 reasons you need this bit…
- The 1/8″ down bit removes what the 1/4″ leaves behind in pockets and around letters.
- It does the finish work for many projects.
The down-cut endmill is the king of CNC routers because it leaves super-crisp cuts at the top of the edges. Sanding is eliminated!
For these reasons, you want to make sure your 1/4″ down cutter is made right & built to last. That’s why these are made above industry standards and 100% tungsten carbide.
Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.
You’ll want to include a collet with this bit if you do not have one. You can order that by clicking here.
Order your finishing workhorse 1/8″ down-cut bit today. And make sure you order your backup bit!
Made in the USA
Specs
- Cut diameter: 1/8″
- Shank: 1/8″
- Length: 1.51″
- Flutes: 2
- Flute length: 0.7″
- Material: 100% carbide
Settings
- Feed: 25-40 inches per minute
- Speed (rpm): 13000-16000
- For CNC’s with routers, use full speed
Is it time to replace your 1/4″ down-cut endmill? https://www.idcwoodcraft.com/product/1-4-down-cutting-bit-for-cnc-routers/
For Vectric users, get the latest CNC router bit tool database by clicking here
For CNC’s with routers, refer to this PDF download feeds & speeds table
DC-18
| Weight | 1 oz |
|---|---|
| Shank Size | 1/8" |
| For Materials | Wood |
0 Reviews
There are no reviews yet.