You may also like…

Your 1/8″ 0-flute bit is here! 0-flute bits are the go-to bits for all things acrylic with CNC routers. If you haven’t created LED-lit acrylic projects, it’s definitely time.

You are getting a 1/8″ diameter O flute bits to tackle those detailed Acrylic signs you’ll be making.

Acrylic requires a high-spiral bit that minimizes contact with the plastic to prevent melting, which ‘galls’ the material to the bit, making it ineffective. This also virtually eliminates the other enemy of cutting plastic…melting it and causing it to bind to the cut surface.

The specs, feeds and speeds are listed below.

Save 25% when you buy the set, 1/8″ AND 1/4″. You can get them by clicking here now.

All bits on this site are made of carbide steel. Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.

For depth of cuts, see table at the bottom

Specs for 1/8″

  • Cut diameter: 1/8″ (3.175mm)
  • Shank dia: 1/8″ (3.175mm)
  • Overall Length: 1.5″ (38mm)
  • Flutes: 1
  • Flute length: 0.5″ (12mm)
  • Material: 100% carbide

Settings

  • Feed: 60-80 inches per minute (25-30mm per second) for acrylic
  • Plunge (for drilling only): Same as feed**
    • **NOTE: It is always best to ramp into the project
  • Speed (rpm): 13000
  • For CNC’s with routers, use half speed

Depth of cut for 1/8″

  • On acrylic: Up to 0..25″ (6mm}
  • On aluminum: 0.125″ (3.5mm)

For Vectric users, get the latest CNC router bit tool database by clicking here

For CNC’s with routers, refer to this PDF download feeds & speeds table

OF-18,0F-18

Weight 1 oz
0
0 Reviews, 0 Q&As
0%
0%
0%
0%
0%
Be the first to review “1/8″ 0-Flute Bit For Acrylic (CNC Router), 1/8″ Shank [Premium]”


0 Reviews

There are no reviews yet.

0
0 Reviews, 0 Q&As
0%
0%
0%
0%
0%

0 Questions

  1. There are no question yet.

Your Cart

No products in the cart.
Free shipping on all orders over $75
Hit Enter to search or Esc key to close